Comments on: Strippin’

By: Mr. Moons

Mr. Moons — Thu, 15 Oct 2009 10:06:20 +0000

I <3 stripped interiors.
Rock on mang.

By: xBtony

xBtony — Thu, 15 Oct 2009 06:45:50 +0000

Dope! I need to finish strippin mine. Nice work man..stoked to see the cage in there

By: Logan

Logan — Mon, 12 Oct 2009 18:51:26 +0000

I regret making my car non streetable

By: daniel kuo

daniel kuo — Mon, 12 Oct 2009 07:30:56 +0000

sweeett.. after the cage it must be a sr

By: Kyle

Kyle — Sun, 11 Oct 2009 17:22:40 +0000

That would have been awkward aha. I did use dry ice on all of the floor. The wheel wells were too thin to use dry ice and would just pound in with the deadening. So heat and scraping was needed. And the wires that run through the back. I plan on routing them through the inside of the body as you said, Skippy. Makes it look much cleaner in there.

By: PBlow

PBlow — Sun, 11 Oct 2009 17:01:19 +0000

I was half expecting to see a shirtless you with a title like “strippin”

By: Cbleslie

Cbleslie — Sun, 11 Oct 2009 16:57:22 +0000

Should have used dry ice.

By: Skippy

Skippy — Sun, 11 Oct 2009 09:43:51 +0000

Hi!

Nice S13. I’m busy with stripping mine as well, but I’m not doing it as seriously as you are, since mine is my daily road car.

However, I had an idea of doing something with the wire loom. I thought it might be a good idea for your S13 too. I stripped my loom of all unnecessary and obsolete wires. I also shortend a lot of wires and hid a lot of the loom inside the body of the car, so the most of it isn’t visible anymore.

Take a look of what I did on my blog if you like. johnjoosten.net

By: Wayne T. Edwards

Wayne T. Edwards — Sun, 11 Oct 2009 05:42:09 +0000

dope dope dope.